News
Spiral Wound Gaskets: Types, Materials & How to Select the Right One
How to select spiral wound gaskets by winding material, filler, and ASME B16.20 color code — with a quick-reference chart for oil & gas and chemical plant flanges.
Read More
Flange Gasket Selection Guide: Materials, Types & Pressure Classes
A practical guide to choosing flange gaskets: sheet vs spiral wound vs RTJ, material temperature limits, and how flange face and pressure class drive the decision.
Read More
Rubber Gasket Materials Compared: EPDM vs Viton vs Nitrile vs Neoprene
EPDM, Viton (FKM), nitrile, neoprene, and silicone compared by temperature range and chemical compatibility, so you can pick the right rubber gasket material the first time.
Read More
PTFE Gaskets: Where They Excel in Chemical & Pharmaceutical Service
Virgin, filled, and expanded PTFE gaskets compared — chemical resistance, creep behavior, and where each belongs in chemical plants, pharma suites, and semiconductor fabs.
Read More
RTJ Gaskets Explained: Ring Type Joints for Oil & Gas Flanges
R, RX, and BX ring joint gaskets for API 6A wellhead and high-pressure hydrocarbon flanges — oval vs octagonal profiles, material hardness rules, and installation practices.
Read More
Kammprofile & Graphite Gaskets for High-Temperature Service
Why kammprofile and flexible graphite gaskets dominate high-temperature flanges, heat exchangers, and steam service — and when to upgrade from spiral wound.
Read More
Camlock Fittings Guide: Types A–F, Materials & Sizing
The complete camlock (cam and groove) fitting reference: what each type A–F and DC/DP does, how to size them, and choosing aluminum vs stainless vs poly.
Read More
JIC Fittings Explained: Sizes, Identification & When to Use Them
JIC 37° flare fittings demystified: dash sizes, thread charts, JIC vs AN vs ORFS vs NPT, and assembly torque basics for leak-free hydraulic connections.
Read More
Stainless Steel Fittings: 304 vs 316 and How to Choose
304 vs 316 stainless fittings, threaded vs socket weld vs butt weld vs compression, and pressure class basics for chemical, pharma, and coastal plant service.
Read More
Tri-Clamp Fittings: Sanitary Connections for Pharma & Food Processing
Tri-clamp (tri-clover) sanitary fittings explained: how sizing really works, gasket material selection for CIP/SIP, surface finish specs, and 3-A/ASME BPE basics.
Read More